| TECHNICAL SPECIFICATIONS | |
| Mix ratio range |
1:1 to 100:1* |
| Mix ratio tolerance | +/- 1% |
| Minimum flow rate | 2cc/min* |
| Maximum flow rate | 256 fl oz/min / 7,570 cc/min* |
| Maximum working pressure | 3,000 psi |
| Maximum Inlet pressure | 3,000 psi |
| Air supply pressure range | 85 psi to 135 psi |
| Operating temperature range | 40F to 125F |
| Electrical requirements | (single phase) |
| 120 VAC nominal | 95 – 125 VAC 50 – 60 Hz |
| Dimensions | |
| Cabinet console | 25" W x 49" H x 34" D |
| Wetted materials | 303 SS, 316 SS, TFE, PE |
| Fluids handled | one,
two, three components (epoxy, polyurethane, polyester, and other chemistries) |
| Viscosity range | water to non-flow abrasive compounds |
|
*
Application dependent. For more information on mix ratios, and flow
rates contact Fluidic Systems.
|
|
Call
for A Demonstration Today - (714) 556-6747 Fax (714) 556-6762